>

Biocompatible Photopolymer Resin

BioMed Clear Resin is a rigid material for biocompatible applications requiring long-term skin or mucosal membrane contact. BioMed Clear Resin is the perfect choice for applications that require wear resistance and low water absorption. Parts printed with BioMed Clear Resin on our FormLabs printers are fully compatible with common sterilization methods.

BioMed Clear Resin:

  • Medical device and device components
  • Jigs and fixtures
  • Surgical planning and implant sizing tools
  • Research and development
Order 3D Printed Parts Online
humidity

Tensile Strength

Post Cured (Imperial) 52 MPa
Post Cured (Metric) 7.2 ksi

resilience

Water Absorption

Absorption Level: 0.54%

pipette

Available Colors

  • Clear

Material Properties

Strength
Impact Resistance
Heat Deflection
Surface Quality
Properties Metric Imperial
Young’s Modulus 2080 MPa 302 ksi
Elongation at Failure 12% 12%
Flexural Strength at 5% Strain 2300 MPa 332 ksi
Impact Properties 0.3 ft-lbf/in 0.46 ft-lbf/in
Flexural Modulus 2300 MPa 2300 MPa
Hardness Shore D 78 D 78 D
IZOD Unnotched Impact Strength 449 J/m 8.41 ft-lbf/in
Material Data Sheet